Based on the suspicions that there was junk in the hole it was decided to RIH with a 12 1/8" tricone steel drill bit that is specially designed for junk cleaning as well as a junkbasket. While waiting for the delivery of the drill bit from Reykjavik it was decided to use the time to assess the cement behind the anchor casing from below 1300 m depth with a CBL log. CBL logging was completed by 3:50 pm. By then the drill bit had arrived at drill site and RIH could commence. Drill bit and junk basket reached fill at 2039 m depth at 2:30 am this morning. After checking depth of fill drilling could commence. The plan is to drill to 2060 m depth and then POOH to plug the hole with cement.